PLANET INDUSTRIAL 4G LTE CELLULAR GATEWAY WITH GPS
More Information
SKU ICG2420GLTE
Brand PLANET
Barcode EAN 4711605283175
Datasheet
Manual

Dit is een bestelartikel, bij bestelling kan deze niet geannuleerd of teruggenomen worden.
Article de commande. En cas de commande, celui-ci ne peut être annulé, ni repris.

PLANET INDUSTRIAL 4G LTE CELLULAR GATEWAY WITH GPS

Description

Model: Planet ICG-2420G-LTE-EU

 

Industrial 4G LTE Cellular Gateway with 4-Port 10/100TX (2 SIM Card Slots, 2 RS232, 1 RS485, DI/DO, GPS, -20~70 degrees C, LTE Band B1/B3/B5/B7/B8/B20/B38/B40/B41)

 

4G LTE Cellular Communication Solution

PLANET ICG-2420G-LTE adopts 4G LTE cellular technology and thus breaks the 100m limitation of RJ45 transmission. Moreover, wherever there is a cell site, the data rate can be transmitted as far as the distance goes. To avoid data loss affected by an unexpected breakdown connection on the part of ISP, the ICG-2420G-LTE has dual SIM card slots, meaning it can support two different ISPs for redundancy.

 

Features

Physical Port

  • 3 10/100BASE-TX RJ45 LAN ports, auto-negotiation, auto MDI/MDI-X
  • 1 10/100BASE-TX RJ45 WAN port, auto-negotiation, auto MDI/MDI-X
  • 2 4G LTE 2dBi antennas
  • 1 GPS antenna
  • 2 SIM card slots
  • 3 console interfaces (2 RS232 and 1 RS485)
      • - COM1 (RS232 for management and setup)
      • - COM2 (RS232 for remote serial device)
      • - COM3 (RS485 for remote serial device)
  • One DIP switch to improve the communication of RS485 networks

Cellular Interfaces

  • Supports multi-band connectivity with FDD LTE/ TDD LTE/ WCDMA/ GSM/ LTE Cat4
  • Built-in dual SIM for network redundancy
  • Two detachable antennas for protection against radio interference
  • LED indicators for connection and data transmission status

Industrial Case and Installation

  • IP40 aluminum case
  • DIN-rail design
  • Power requirement: 10~32V DC
  • Supports EFT protection for 2000V DC power and 6000V DC Ethernet ESD protection
  • -20 to 70 degrees C operating temperature

Digital Input and Digital Output (Alarm)

  • 2 digital input (DI)
  • 1 digital output (alarm)
  • Integrates sensors into auto alarm system
  • Transfers alarm via SNMP trap

Advanced Features

  • Supports demilitarized zone (DMZ)
  • Supports OpenVPN
  • Supports IPSec (3DES, AES128, AES196, AES256, MD5, SHA-1, SHA256)
  • Supports Modbus TCP (Only functions with COM3 RS485)
  • Supports Port Forwarding
  • Supports Dynamic DNS and PLANET DDNS
  • Supports WAN connection types: DHCP client, static IP and PPPoE client
  • Secures network connection
      • - IP filter
      • - URL filter
      • - MAC filter

Management

  • IPv4 and IPv6 dual stack management
  • Switch management interfaces
      • - Console/Telnet Command Line interface
      • - Web switch management
      • - SNMP v1, v2c, and v3
      • - SSHv2 secure access
  • IPv6 IP address/DNS management
  • System Maintenance
      • - Firmware upload via HTTP
      • - Reset button for system reboot or reset to factory default
      • - Dual images
  • SNTP (Simple Network Time Protocol)
  • TR069
  • System log
  • Remote system log
  • SNMP trap for interface Link Up and Link Down notification
  • Configuration backup and restore

 

Hardware Specifications
Copper Ports 3 LAN 10/100BASE-TX RJ45 auto-MDI/MDI-X ports
1 WAN 10/100BASE-TX RJ45 auto-MDI/MDI-X port
Serial Interface 3 serial interfaces (2 RS232 and 1 RS485) 
COM1 (RS232 for management and setup) (115200, N, 8, 1)
COM2 (RS232 TXD/RXD for remote serial device)
COM3 (RS485 D+/D- for remote serial device)
SIM Interface 2 SIM card slots with mini SIM card tray
Cellular Antenna 2 2dBi external antennas with SMA connectors for LTE
GPS Antenna 1 28dB gain external antennas with SMA connectors for GPS -2m
DI &DO Interfaces ■ 2 Digital Input (DI):
 Level 0: 0V~3V (±0.1V)
 Level 1: 10V~30V (±0.1V)
■ 1 Digital Output (alarm):
Open collector to 50V DC, 500mA (max.)
Connector Removable 3-pin terminal block for power input
Removable 11-pin terminal block for DI/DO and serial interface
Switch Architecture Store-and-Forward
Address Table 1K entries, automatic source address learning and aging
Flow Control IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Reset Button < 5 sec: System reboot
> 10 sec: Factory default
Surge Protection 2KV DC
ESD Protection 6KV DC
Enclosure IP40 aluminum case
Installation DIN rail kit
LED System:
 SYS (Green)
Ethernet Interfaces (Port1-3 and WAN Port):
 LNK/ACT (Green) 
 100 (Orange)
 10 (off)
LTE SIM and Signal :
 VPN (Green)
 SIM1 and SIM2 (Green)
 Cellular signal: High and low (Green)
Dimensions (W x D x H) 60 x 106 x 110 mm
Weight 457g
Power Requirements – DC 10~32V DC, 1A
Power Consumption 7 watts/24 BTU
Multi Band Supports
EU Model ■ FDD LTE B1/B3/B5/B7/B8/B20 (2100/1800/850/2600/900/800)
■ TDD LTE B38/B40/B41 (2600/2300/2500)
■ WCDMA B1/B5/B8 (2100/850/900)
■ GSM/EDGE B3/B8 (1800/900)
US Model ■ FDD LTE B2/B4/B12 (1900/AWS1700/700)
■ WCDMA B2/B4/B5 (1900/AWS1700/850)
Advanced Functions
VPN Tunnel Number
 ■ OpenVPN: 10
 ■ IPSec 12:
IPSec: 
Encryption Algorithm: 3DES/AES128/AES196/AES256
Integrity Algorithm: MD5/SHA1/SHA256
WAN Connection Types DHCP Client
Static IP
PPPoE Client
Secure Network IP filter
URL filter
MAC filter
Other Supports demilitarized zone (DMZ)
Supports Modbus TCP (only functions with COM3 RS485)
Supports Port Forwarding
Supports Dynamic DNS and PLANET DDNS
Management
Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c, TR069
Secure Management Interfaces SSHv2, SNMPv3
SNMP MIBs RFC 1213 MIB-II
RFC 1643 Ethernet MIB
RFC 2665 Ether-Like MIB
RFC 4293 IP MIB
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x flow control and back pressure
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
Environment
Operating Temperature: -20 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Product Questions

No questions yet. Be the first to ask the question!